User's Manual

- Enter the PIN as detailed above, followed by the additional
two digits 1, 1.
- The tell tale will flash rapidly for one second, then turn off.
- Within 8 seconds, press any button on the transmitter to be
programmed. The tell tale will then pulse rapidly and the siren
will beep.
- Within 10 seconds press any button on the next transmitter
to be programmed (if applicable), and repeat this process for
all remaining transmitters.
- When all transmitters have been programmed, wait for 10
seconds, or turn off the ignition.
To disable a lost or stolen transmitter from the system, use
the above procedure to programme 6 transmitters, if necessary
repeatedly reprogramming the same transmitter if less than 6
programmed transmitters are to be used.
The following statement is mandated by the Federal Com
-
munications Commission:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CON
-
DITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY UNAU
-
THORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
Keys & Car Security Alarm
23