Manual

ENGLISH
ENGLISH
ENGLISH
97
8
10
FAUCET FUNCTIONS
DRAIN BODY INSTALLATION
7 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Supply Tubes (7A), approximately three inches apart.
Connect water Supply Lines (7B) to Faucet Inlets (7C). Hot water supply line goes to hot
inlet fi tting indicated by red tag (7D). (Supply lines not included). Follow manufacturer’s
instructions when installing supply lines.
8 DRAIN INSTALLATION
Install and adjust Drain (8A) using separate instructions supplied with the Drain assembly
(Not included, order separately).
For sinks with less overfl ow order Drain Body T47-7GL. For sinks with overfl ow order
Drain Body T47-9GS.
9 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
10 VALVE FUNCTION
By lifting the Lever Handle (10A) up, the valve will be activated allowing water to fl ow.
The water fl ow will increase by continuing to lift up the Lever Handle (10A). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold fl ow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot fl ow only.
3
7A
7C
7D
7B
7A
7C
7B
10A
10A
8A
COLD
HOT
OPEN
HOT
COLD