Instructions / Assembly

ENGLISH
ENGLISH
16
17
FAUCET FUNCTIONS
18
19
15
MAINTENANCE & CARE
20
15 SPRAY HEAD INSTALLATION
Assemble Spray Head (15A) to Pullout Hose (15B) by turning the metal Hose Fitting
(15C) clockwise.
Caution: do not over tighten!
16 SPOUT FUNCTION
The Spout (16A) can be rotated from side to side.
17 VALVE FUNCTION
By lifting Lever Handle (17A) up, the valve will be activated allowing water to ow. The
water ow will increase by continuing to lift up Lever Handle (17A). By rotating Lever
Handle (17A) counterclockwise, the water temperature will decrease to fully cold. By
rotating Lever Handle (17A) clockwise, the water temperature will increase to fully hot.
18 PULL-OUT OPERATION
The Pull-Out Hose (18A) can be pulled forward to spray water in any direction.
19 SPRAY OPERATION
To activate the spray mode, simply press Toggle Button (19A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of
the Toggle Button (19A/19B) while the faucet is in operation.
Note: The faucet will always turn on in regular stream mode.
20 AERATOR CLEANING
Over time, the aerator in your faucet may become clogged with debris. To clean, unscrew
Aerator (20A) from Spray Head (20B) using a
7
/
8
” open ended wrench or adjustable
wrench. Separate Aerator Housing (20C), Aerator Basket (20D), and Flat Seal (20E).
Once parts have been cleaned, reassemble by reversing these steps.
5
HOT
COLD
ON
16A
17A
19A
15A
15B
15C
17A
18A
20A
20B
20C
20D
20E
19B