Instructions / Assembly

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Pster product. All Pster products are carefully engineered, and factory tested to provide long

trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated

instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Pster

recommends calling a professional if you are uncertain about installing this product!

This product should be installed in accordance with all local and state plumbing and

building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found

under the sink or near the water meter. If you are replacing an existing faucet, remove

the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty • PTFE Plumber's Tape • Slotted screwdriver

• Adjustable wrench • Pliers • Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional

tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Faucet D Deckplate G Long Nut

B Lift Rod E Putty Plate H Pop-up Assembly

C Base Plate F Metal Washer

If any of these items are missing, please contact Pster Consumer Service at

1-800-Pfaucet (1-800-732-8238).

5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING

Place a bead of plumber’s putty in the groove along the bottom outer edge of Base Plate

(5A). Place Base Plate onto top of Hole (5B) of sink. From above sink, insert Threaded

Shank (5C) and Supply Tubes (5D) through hole (5B) on sink.

6 INSTALLING FAUCET WITH DECKPLATE

Ensure that the Plastic Putty Plate (6A) is pressed on the Deckplate (6B). Place a

bead of plumber’s putty in the groove along the outer edge of the Putty Plate (6A).

Assemble Deckplate (6B) and Putty Plate (6A) to Faucet Body (6C). With the handle

and spout facing forward, carefully install the Faucet Supply Tubes (6D) through the

center hole of sink (6E).