Data Sheet

8. Exposure controls/personal protection
8.1 Control parameters
Before grinding it is recommended to perform a risk assessment and to use personal protection equipment accordingly.
Occupational exposure limit values and/or biological limit values
Keep exposure to the following components under surveillance.
(Observe also the regional official regulations)
Occupational limit value
Limit value type
(country of origin)
Substance CAS-N° Long term Short term Peak limit Source, remark
OEL (IE) dust - general, not
otherwise specified or
classified
4 A mg/m³, 10
E mg/m³
OEL (HU) dust - general, not
otherwise specified or
classified
6 A mg/m³, 10
E mg/m³
VLEP/GWBB (BE) dust - general, not
otherwise specified or
classified
3 A mg/m³, 10
E mg/m³
MAK (AT) dust - general, not
otherwise specified or
classified
5 A mg/m³, 10
E mg/m³
10 A mg/m³, 20
E mg/m³
GKV 2020
OEL (SE) dust - general, not
otherwise specified or
classified
5 A mg/m³; 10
E mg/m³
VLA ( ES) dust - general, not
otherwise specified or
classified
3 A mg/m³; 10
E mg/m³
OEL (FR) dust - general, not
otherwise specified or
classified
5 A mg/m³; 10
E mg/m³
OEL (DK) dust - general, not
otherwise specified or
classified
10 E mg/m³ 20 E mg/m³
AGW (DE) dust - general, not
otherwise specified or
classified
1,25 A mg/m³;
10 E mg/m³
2(II) TRGS 900
A = respirable fraction; E = inhalable fraction
Note: Hazardous dust of the workpiece material may be generated during grinding and/or sanding operations. National
regulations for dust exposure limit values have to be taken into consideration.
Limit value type
(country of origin)
Substance CAS-N° Parameter BGW (biological
limit value)
Analysis material Sampling time Source,
remark
8.2 Exposure controls
8.2.1. Individual protection measures
Copyright FEPA, 20 Avenue Reille F-75014 PARIS EU
FEDERATION EUROPEENNE DES
FABRICANTS DE PRODUITS ABRASIFS
Reference/Productname:
Version/ Revision (date):
Printing date:
45016308
FEPA - 3.2
14.04.2021
14.04.2021
page 3 of 6