Datasheet

Mechanical Hygrostat FLZ 600
Mechanical hygrostat with change-over contact for triggering heating and / or
Filterfan
®
at a preset level of relative humidity.
This maintains the relative humidity above the dew point to prevent condensation
and corrosion.
We reserve the right to technical alterations.Subject to correction. 075000031
37
64
46
116
IP 20
Level of
protection
AC DC
Technical data: FLZ 600
Type of contact change-over switch
Control range 40 - 90% r.H.
Max. breaking capacity, value in brackets
NCC: 24V - 250V AC / 5(0,2) A - min. 100 mA
inductive load at cos(phi) = 0,6
NOC: 24V - 250V AC / 2(2) A min. 100 mA
DC: max. 30W
Differential gap approx. 5%
Tolerance for switching point +/- 4% based on 50% r.H.
Sensor polyamide band
Connection 2-pole clamp 0,5 - 2,5 mm
2
Colour RAL 7035 - light grey
Weight 55 g
System of protection IP 20
Operating temperature 0 °C (+ 32 °F) ... + 60°C (+ 140 °F)
Storage temperature - 20 °C (- 4 °F) ... + 80°C (+ 176 °F)
Mounting method snap fastening for 35mm profile bars in accordance with EN 60715
Approvals UL approval applied for