Operation Manual

prog
a
G
b G
Sewing on buttons
With zigzag
stitch
0
{stitch
width 4 mm) you
can sew on
two- and four-hole
buttons with
no
problem at all.
— Remove the
sewing
foot
and lower the
feed
dog.
— Turn the
handwheel towards you and
move
the
button in such a way
that the
needle
enters the left hole
in the button.
— Now lower the
presser foot lifter; this
holds
the
button off the blade.
— Sew on the button.
Take care to
ensure that
the needle also enters the
right-hand hole
in the
button.
Securing
0
— Select straight
stitch by turning the
width
knob
(34) to 0.
— Change the needle
position with the knob
35) so
that the needle
enters one of the
two holes.
— Sew a
few securing stitches.
— Remove the match
and pull the
fabric and
the button apart.
— Wrap the stem you
have just
created with
sewing thread end knot
it.
Sewing
on
buttons
with stems
E
— Insert
the
sewing foot.
— Place a
matchstick between
the holes of
the
button and
sew it on as
described on the
left.
39