Operation Manual

It is very important to clean and oil the sewing
machine, because
it will reward
you
with
a
longer service life.
The more often
you use the
machine, the more care it needs.
Removal:
— Raise the
sewing foot and remove
the deta
chable work
support.
— Push the point of a
small screwdriver into
the opening between needle plate and
sewing machine. Twist it lightly to the right
and the needle plate will snap half way out
of its mounting. Now push the screwdriver
into
the
left opening and take the needle
plate out.
Replacing
A
Cleaning and oiling
Switch
off the
main switch
— Remove the
needle plate
and
lower the teed
dog.
— Clean the feed dog and hook area with the
brush.
Then apply
a
drop of
oil every
15 to 20
hours
of
operation) to the hook. You can
see
where
to apply the
oil in
the
illustration
and on the provided
oil
bottle.
Otherwise,
the
machine is maintenance-tree
and must not be oiled.
— Place the needle on flat at the back and
push it down with both hands at the front
until you
hear it snap in place. Before
you
start
sewing,
check that the
needle
plate
is
lying flat.
I
A
Changing the
needle plate
Switch off the main switch
86