User Guide

40
St-3
St-4
User’s Guide
5. In the Select Different
Design screen, click on the
Heart 1 and click OK (Fig.
St-3).
6. You are returned to
the main screen of the
Navigator (Fig. St-4).
7. Check that the machine
is threaded, the hoop is
attached, and the presser
foot is lowered. Press
the Start/Stop key on the
machine.
8. The machine will stop at
the end of the fi rst color.
Raise the presser foot and
change the thread color.
Lower the presser foot and
press the Start/Stop key
to continue embroidering.
Repeat at the following
color changes until design
is complete.
Hoop your fabric
with a piece of
stabilizer so that it
is taut in the hoop.
It should be smooth
and free of wrinkles.