User Guide

35
H-1
CONNECTIVITY TO
YOUR COMPUTER
Hooping
For better embroidery results place
a layer of stabilizer under the fabric
and hoop both the stabilizer and
fabric.
The fabric and stabilizer must be
smooth and taut in the hoop. Any
distortion of the fabric will impair the
fi nished quality of the embroidery.
1. Loosen the hoop screw and
remove the inner hoop.
2. Lay the outer hoop in front
of you with the guide pins for
putting it on the embroidery unit
on the right.
3. Place the stabilizer and then the
fabric over the outer hoop, with
the right side up. Ensure that the
fabric is draped over the edge of
the hoop.
There are two main
types of embroidery
stabilizer - cutaway
and tearaway.
Choose cutaway
stabilizer for knit
fabrics and other
unstable fabrics
because it provides
better support.
Use tearaway
for stable woven
fabrics.