User Guide

14
a)
b)
c) d)
User’s Guide
Top Threading
1. Raise presser foot to
thread the machine (a).
2. Assure that the needle is in
the highest position.
3. Bring thread from spool
to the left into fi rst guide
from the front, then into
the second guide from the
back (b) straight forward
and down into the right
hand slot under and
around then up the left
slot. Continue left over
and into take-up lever and
down to the guide above
the needle (d).
4. Lower presser foot.
5. Pass thread behind guides
and thread needle as
shown (d).
Always raise the
presser foot for
threading. The top
thread pulls freely
through the thread
path and guides
when the presser
foot is raised. The
top thread does not
pull freely when the
presser foot is down
because the thread
tension is engaged.