Operation Manual

Twin needle (Optional)
- Turn stitch
width dial to “0”.
- Turn stitch length dial
to the desired stitch length.
- Turn
stitch selector to straight stitch,
center needle position..
- For twin needle sewing, insert the
extra spool pin (included
with
the
accessories) into the hole on top of
the machine.
- Make sure that
the two
threads
used to thread
the twin needle
are of the same weight. You
can use one or two colors.
- Insert
the twin needle in the same way
as
single
needle. Flat side
of needle should face away from
you.
- Follow
instructions for single needle threading.
Thread each needle separately.
Please Note:
When sewing
with twin needle, always proceed slowly,
and make sure to
maintain
a
low
speed to insure quality stitching.
When using twin needle on zigzag make
sure the stitch width dial is
set
between “1” and
‘3”.
Do not use twin needle
at setting above
“3”.
31