Operation Manual

28
A
C
B
4.2
G 0 2.5 3-5 0/1
3.2
G 0 2.5 3-5 0/1
2.2
G 0 2.5 – 3-5 0/1
4.2
G 2- 1-2 3-5 0/1
3.2
G 2- 1-2 3-5 0/1
2.2
G 2- 1-2 – 3-5 0/1
Utility stitches and practical sewing
Straight stitch
StitchGisthebasicstraightstitch.The
stitch length can be increased up to 6 mm.
It is easier to do some sewing jobs by
changing the needle position, e.g. top-
stitching a collar or sewing in a zipper.
You can select up to 15 different needle
positions.
Please ensure that the needle is at its
highest position when adjusting the
needle position.
Zigzag stitch
Inadditiontooverlockstitching,zigzag
stitchG,stitchwidth5 , is also suitable
forovercastingvariousmaterials.In
this case, the material should only be
positioned halfway under the sewing foot.
Whenovercastingtheedge,makesurethe
needlegoesintothematerialandoverthe
edge alternately.
Thewidthforovercastingcanbereduced
up to 2 mm.
Forovercastingdifcultmaterials,blind
stitchfootNo.3isveryuseful.When
sewing,thethreadliesoverpinC,thus
preventingcurlingofthefabricedge.In
this way you can sew beautiful smooth
seams.
The raw edge must be guided along edge
guide B. You can adjust this edge guide
withadjustingscrewA.
Important! When the blindhem stitch foot
isusedforovercastingwiththezigzag
stitch, select the right needle position.
Choose a stitch width in the range of 3-5
mm(donotuseanyotherneedleposition).
Stitch
Stitch