Operation Manual

13
A
B
C
A
B
Operate your sewing machine
Winding the bobbin from the
spool pin
Place the sewing thread on the spool
pin(9).Toguaranteefreemovement
ofthethreadandtogiveadditional
holdtothethreadspool,taspoolcap
corresponding to the size of the thread
spool.
Threading
PlacethethreadintoguideAandpullit
through opening B and to the right under
the hook C. Wind the thread clockwise a
few times around in the bobbin.
Winding
Switchonthemainswitch(1).Holdthe
endofthethreadrmlyandpressthe
foot control. The winding action will stop
automatically as soon as the bobbin is full.
Cut the thread, push the bobbin to the left
andremoveit.
Don’t forget:
Turnthehandwheelreleasedisk(3)fully
backagain.Thenturnthehandwheel(4)
towards you until it snaps into place.