Operation Manual

2
220 V
120 V
Operate your Pfaff select
Carrying-case
Place the cords, foot control and instruction
book in the compartment of the carrying-case
Top cover
Open the folding cover (6) upwards
The stitches of the sewing machine are
illustrated on the inside of the top cover.
Connecting the foot control
Connect the plug of the foot control to the
connecting socket (1) of the sewing machine
and to the wall socket. The sewing speed is
regulated by pressing the foot control.
Additionally, you can regulate the sewing
speed by moving the slide on the front part of
the foot control.
Position
= half speed
Position
= full speed
For this sewing machine, a foot controller typ
AW 0253 or AE 013 must to be used.
Main switch
When the main switch (2) is switched on, the
sewing lamp lights up.
The sewing machine is now ready to use.
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electric shock, this plug is intended to fi t in a
polarized outlet only one way. If the plug does
not fi t fully in the outlet, reverse the plug. If it still
does not fi t, contact a qualifi ed electrician to
install the proper outlet. Do not modify the plug
in any way.