Operation Manual

Sewing
on
buttons
— No 64
With
Button
sewing
program
64
you
can
easily
sew
on two
and
four-hole
buttons.
• Remove
the
presser
foot and
lower
the feed
dog.
(Make
sure
the IDT
is
disengaged.)
•
Mark
the
button
position
on
your
fabric. Place
the
button
on
the
marked
fabric.
•
Turn
the
handwheel
towards
you
and
position
the
button
so
the
needle
enters
the
left
hole
in
the
button.
• Lower
the
presser
foot lifter.
The
button
will
be held
in
place
by
the
shank
of the
foot.
Turn the
handwheel
to make
sure the
needle
also
enters
the
right hole
of the
button.
• Continue
sewing
on the
button.
The
machine
will
complete
the
program
for
you.
Tip! use
the
optional
Sew on Button
Foot to sew
optimal buttons.
Sewing
on buttons
with shanks
— No
64
•
Attach
the
presser foot.
• Leave
the feed
dogs lowered.
Place
a
toothpick
between
the
holes
of
the
button
and
sew
it on as described
on
the left.
•
Remove
the
toothpick
and pull
the
button and
fabric
apart.
• Wrap
the
stem
with
sewing thread
and
knot it.
Tip!
use
the
optional
Sew on Button
Foot
to sew optimal
buttons with
shanks.
Eye’ets
— No
71
To
stitch
eyelets on
a
belt
or linen
items,
select
stitch 71,
68