Operation Manual

Trouble
shooting
Needle
thread
breaks
Cause:
Remedy:
1.
Needle
not
threaded
correctly.
Thread
the
needle
from
front
to back.
2.
Thread
tension
too
tight.
Turn
tension
dial toward
“0”
somewhat.
3.
Something
is wrong
with
the needle.
Needle
may be
blunt
or
bent.
Insert
new
System
130 R
or 705
needle.
4.
Thread
used
is
too
heavy
for the
Use proper
thread
size as
indicated
in
needle.
the Thread
Chart.
5.
Needle
inserted
improperly.
Push
needle
up as
far
as it will
go,
mak
ing
sure
flat
side
of shank
faces
toward
the
back.
6.
Sewing
foot,
shuttle
or
shuttle
race
Replace
damaged
part
and
send it
in for
may
be damaged,
repair,
if considered
worthwhile.