Operation Manual

Threading
Turn
the balance wheel
until
tape-up
lever
7
(Fig. 10> is at
its
highest
point.
Put a spool of thread
onto one of the
spool pins. Pull the
thread through
guides 1 and 2,
clockwise around and
between tension
discs 4, and through
the thread check spring. Now
pull the
thread
upwards behind
guide 6, and
from right to
left through the
hole in
lever 7, then down
through guides 8,
9
and
10. Thread
the needle from front
to
back and
pull about four
inches of
thread
through its eye.
Fig.
10