Operation Manual

Points
to observe during sewing
Thread cutter
In
order
to be
able to use thread cutter
39
it is necessary to
sew
beyond
the
end of
the seam. Draw the resulting
thread chain
through the thread
cutter
from the rear (see
illustration below
left).
Securing the
seam:
Knot the
thread chain. For knit fabrics,
a
crochet
needle can
be used to
pull
the
thread chain into the seam.
Or:
Sew about 5
cm
(2”)
beyond
the
end of
seam.
Turn the workpiece around and
sew
a
few stitches over the seam just
sewn without
cutting the thread chain.
Sew the
first stitches slowly. If the
machine has been
rethreaded, place
the
fabric under sewing
foot 14
and
push
it
up to
the needle before starting
to
sew.
Since the fabric is
fed automatically,
do
not
pull or push the fabric. Use your
hands
for guiding only.
14