Operation Manual

The needle
threads
must always
be inser
ted
last in order
to avoid
mistakes
with
the
left looper
thread
and
thread breakage
or missed
stitches.
Cut the
threads
close to the thread
spool
and set the
new
thread reels
in place.
Tie
together the
threads
still in the
machine and
the new threads,
and pull
the threads
out
of the
needles.
Set all
the
thread tensions
to —5.
Now
pull on
the needle threads
until
the
knots
are
about 15
cm past
the last
thread
guide
before the
needles. Cut
the knots
off and
pull the
threads through
the respective
needle
eyes.
The looper
threads
can
be
pulled
continuously
past
the
looper eye and
laid
to the
left underneath
the sewing
foot.
Important
note
on threading:
The thread
must
also
be
removed
from
the needle(s)
if
the
looper
threads
break.
Re-insert
the looper
thread first,
then
re-thread
the needle(s).
Thread
reel change
on
threaded
machine
18