Operation Manual

A colour-coded threading diagram for
quick reference is
to be found
behind the
looper cover,
i.e.
inside
the machine.
Thread
the
individual
threads — as shown
— following
steps ito 4.
Place the thread spools
on
thread spool
stands 25. Use cone adapters
26
only
with conical spools. Further
notes
on the
thread spool net
and
thread unreeling disc
are to
be
found
on page 10.
Insert the
threads through the guide wires
20
from
back to front according
to the
colour
coding.
3
Faden
linke
rechte
Nadel Nadel
The colour markings are applicable
as
fol
lows:
1.
Right
overedge looper = red
2. Left overedge looper = yellow
3. Right needle
= green
4. Left needle = blue
Lift carrying handle
3.
Insert the threads
beneath
the handle and through rear gui
des 33 by pulling down with both hands
until the yarn slips under the guide wire.
Now pull the thread between the tension
discs
and press it down until it is lodged
between the latter. Return the carrying
handle
to its closed position.
4 Faden
Threading
H
I
Threading/guide
wires
12