Operation Manual

3:8
A
B
5 4.5 2.5 3-5 3
6 4.5 1.5 3-5 3
Sewing
Blind hem stitch
The blind hem stitch is used to make invisible hems on skirts,
trousers and home decorating.
• Finish the edge of the hem.
• Fold and press the hem allowance inwards.
• Fold the hem back on itself so
approximately 1/4 inch (6 mm) of
the fi nished edge extends beyond
the fold. The wrong side of your
project should now be facing up.
• Place the fabric under the presser
foot so that the fold runs along edge guide B.
• When the needle swings into the fold it should catch a small
amount of fabric. If the stitches are visible on the right side,
adjust edge guide B by turning adjusting screw A.
Stitch
Stitch
Stitch 5
Stitch 6
Elastic blind stitch
The elastic blind hem stitch is especially suitable for stretchy
fabrics. The hem is fi nished and sewn at the same time. There is
no need to fi nish the raw edge fi rst.
Create the blind hem as described under ”Blind hem stitch”.