Operation Manual

3:11

ABC

Pfaff HD screen

Sound settings (B)

You can change the sound settings on your

machine for different situations. First select from

the list (G) which sound event you want to change.

Then select the sound (H) you want to play by

touching the button. You will be able to hear the

sound when you touch the sound button. Each

event can have a different sound.

User deÀ ned sound

If you want to import your own sound À les, use

the user deÀ ned icon (I) at the bottom of the list. A

long touch of this icon will open Files & Folders.

Find your sound À le and touch the OK icon. The

name of the loaded sound À le is shown next to the

button.

The sound length for icon acknowledge, button/

icon disabled and for warning or attention pop-

ups is maximum 5 seconds. For starting up and

embroidery À nished, the maximum sound length

is 30 seconds. The sound À les must be stored either

on your machine or, if connected, an external

device or your PC.

Note: You can only play PCM encoded WAV-À les. For

optimal result the À le should be 8-bit mono. The machine

will not support compressed sound À les.

We recommend always storing your sound À les on your

machine before importing them into user deÀ ned sound.

Audio repeat

When active, the signal for some warning or

attention pop-ups is repeated in intervals until it is

cancelled.

Volume

You can change the volume using the slider.