Operation Manual

3:15
C
PFAFF® creative™ Color Touch Screen
Sound settings (C)
You can change the sound settings on your machine
for different situations. First select from the list
which sound event you want to change. Then, select
the sound you want to play by checking one of the
boxes. You will be able to hear the sound when
you check the box. Each event can have a different
sound.
User deÀ ned sound
If you want to import your own sound À les, check
the user deÀ ned box at the bottom of the list.
This will open Files & Folders. Browse your USB
embroidery stick to À nd your sound À le, select it
on screen and touch the OK icon. The name of the
loaded sound À le is shown next to the button. To set
another user deÀ ned sound, long touch the check
box to open Files & Folders.
The sound length for icon acknowledge, button/
icon disabled and for warning or attention pop-
ups is maximum 5 seconds. For starting up and
embroidery À nished, the maximum sound length is
30 seconds. The sound À les must be stored either on
your machine or, if connected, an external device or
your PC.
Note: You can only play PCM encoded WAV-À les. For
optimal result the À le should be 8-bit mono. The machine
will not support compressed sound À les.
We recommend always storing your sound À les on your
machine before importing them into user deÀ ned sound.
Audio repeat
When active, the signal for some warning or
attention pop-ups is repeated in intervals until it is
cancelled.
Volume
You can change the volume using the slider.