Operation Manual

6-10
In the case of program 30, 3-needle, 10-
thread deco cover, the corresponding spool
pin of the yellow thread guide for thread
stand (49) must be used to position the
sixth or decorative thread.
With both hands, pull the threads between
the tension discs and place them under
rear thread guides (46).
Threading the deco cover threads
Place the spools on the corresponding
spool pins (1 x blue, 1 x yellow) of the
detachable thread stand. Thread the
corresponding color coded thread guides
from the back forwards.
Deco-cover thread tension dials, blue and
yellow
Set the deco cover thread tensions, blue
and yellow (45) as indicated on the stitch
program sticker. To do this, turn the thread
tension dials until the corresponding
settings appear directly above line A and
line B.
A
B
Note: For program 29 two
threads will be positioned
between each tension disc. For
program 30 three threads will
be positioned between each
tension disc.