Operation Manual

4-5
Cover stitch
Thread the thread in the guides from 1 to
8. (Make sure: The thread does not pass
under the latch)
Note: The lever will return to
its original position as soon as
you start to sew.
From the front, pass the thread through
eye C (- threading point 10) of the double
chain stitch or cover stitch looper.
Note: In the case of thread
guides 6 and 7, the thread is
simply placed on top of them,
not threaded through.
Press lever A up and hook the thread into
slot B. The illustration below shows how to
do this.
Pull about 10 cm (5”) of thread through
the looper and place it to the left under
the presser foot.
B
A
4
5
6
7
8