Operation Manual

4-2
Cover stitch
Switching the machine to cover stitch
(progs. 01, 02, 03)
Note: Always set up your
creative 4874 as shown in the
display fi rst. Then open the
program memory (see page
3-5) before threading the
machine.
Use the program selection buttons +/- (11)
to select one of the cover-stitches. In our
example, we have selected program 03,
3-needle cover hem.
3.0 1.0
The stitch length and the differential feed
are set automatically, but can be altered
and stored individually (see page 3-4).
0
1
L 21R2
With the needle changing tool, insert
needles L 0, 1 and 2 as far as they will go
into the needle holder (make sure they
are inserted all the way with your fi ngers).
Tighten the associated retaining screw and
remove the needle changing tool.
Pull knob A of the swivelling stitch fi nger
(32) to the right and swing it down into its
disengaged position.
A