Operation Manual

2:4
Preparations
Small spool cap
Main spool pin in vertical position
Large spool cap
Spool pins
Your machine has two spool pins, a main spool
pin and an auxiliary spool pin. The spool pins
are designed for all types of thread. The main
spool pin is adjustable and can be used both in a
horizontal position (the thread reels off the spool)
and a vertical position (the thread spool rotates).
Use the horizontal position for normal threads and
the vertical position for large spools or specialty
threads.
Horizontal position
Place a spool cap and the thread spool on the spool
pin. Make sure that the thread reels off the spool
counter clock-wise and slide on a second spool cap.
Note: Not all thread spools are manufactured in the same
way. If you experience problems with the thread, turn it
in the opposite way or use the vertical position.
Use a spool cap slightly larger than the thread
spool. For narrow thread spools, use a smaller spool
cap in front of the spool. For large thread spools,
use a larger spool cap in front of the spool.
7KHÁDWVLGHRIWKHVSRROFDSVKRXOGEHSUHVVHG
ÀUPO\DJDLQVWWKHVSRRO7KHUHVKRXOGEHQRVSDFH
between the spool cap and the thread spool.
Vertical position
Raise the spool pin to the vertical position. Slide
on the large spool cap and place a felt pad under
the thread spool. This is to prevent the thread from
reeling off too fast.
Do not place a spool cap on top of the spool pin as
that would prevent the spool from rotating.
Note: When the spool pin is used in the vertical position,
the thread tension might need to be adjusted manually.
Auxiliary spool pin
The auxiliary spool pin is used when winding a
bobbin thread from a second spool of thread or for a
second spool when sewing with a twin needle.
Raise the auxiliary spool pin. Slide on a large spool
cap and place a felt pad under the thread spool.
Auxiliary spool pin and main spool pin in vertical
position.