Operation Manual

3:12
Embroidery position
This message prompts you to put the presser foot in embroidery posi-
tion. Lower the presser foot lift slowly and push it to the back until it
engages in the embroidery position. Press the reverse button and start
to embroider. The warning will then disappear.
Appliqué and cutwork stop
When embroidering an appliqué embroidery or a cutwork embroidery,
you will see a fl ashing A in the window instead of a color number, to
indicate a stop in the design.
Cut the thread
When you have sewn a few stitches your Pfaff creative 2134 stops and
fl ashes with the cut symbol, telling you to cut the thread tail. When you
have cut the thread, press the reverse/start-stop button again, and the
machine will continue to embroider.
Raise the presser foot
When this symbol appears with the arrow fl ashing, you should raise
the presser foot to the top position.