Operation Manual

3:9
A
B
Embroidery
Monochrome button
If you activate the monochrome function (54) your
selected design will be stitched out without stop-
ping at color changes. When pressing this button the
monochrome symbol will be shown on the window.
To deactivate the function press the monochrome
button again.
Stitch/design selection buttons
In embroidery mode the stitch/design selection
buttons (55-64) are used for selecting a design. If the
card contains both designs and fonts or only designs
the icon (A) will appear on the window. If the card
only contains fonts, a number below the design
number will indicate font number starting with 1.
If you have chosen a design that does not exist on
the card, the design number (B) will fl ash and then
go back to the previously selected design.