Operation Manual

2:2
Electrical connection
Connect the lead cord between the socket (5) of the sewing machine
and the wall outlet.
For the USA and Canada:
This sewing machine has a polarized plug (one blade wider than the
other). To reduce the risk of electric shock, this plug is intended to
fi t in a polarized outlet only one way. If the plug does not fi t fully in
the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed
electrician to install the proper outlet.
DO NOT modify the plug in any way!
Voltage Switch
220 - 240 V / 120 V
The sewing machine is set to the voltage 220 - 240 V. To change the
voltage to 120 V (US/Canada), you must set the voltage switch on the
underside of the machine to 120 V.
If you are unsure of the correct voltage for your country, please check
with your authorized sewing machine dealer or local electrical authori-
ties before plugging in your machine.
Connecting the foot control
Connect the plug of the foot control to the connection socket (6) of the
sewing machine.
The sewing speed is controlled by pressing the foot control.
The foot control AT 0070 must be used for this sewing machine.