Operation Manual

Binding
edges
with
non-woven
tape
Fold ready-made
bias
binding
lengthwise and
shape-press.
Push the
folded binding
over the
fabric edge
and baste
it in place,
if
required.
Then
sew it on with
straight
stitches (Fig.
1).
Edge-binding
with
the
binder
Sewing foot:
Binder (special
accessory)
Program:
00
Stitch length:
2.5
mm, (Fig.
a)
or
Program:
10
Stitch-width:
2.5
mm
Stitch length:
1.5 mm,
(Fig.
b)
Remove
sewing
foot and
screw on binder.
Insert
the
bias
tape in the
scroll of
the
binder and
pull it
out to
the
rear. Set the
binder
in such
a
way
that
the
needle
enters ito 1.5
mm from the
turned-in
bias
edge. Sew a
number
of
stitches along
the
bias tape.
Place the
raw
edge in the
groove of
the
binder.
During
sewing, the
bias tape is
wrapped
automatically
over the material
edges. Sew
the
bias tape
on with
the above mentioned
program
or
a
program
of your own
selection.
Straight mate
rial edges
are
the
simplest
to bind (Fig. 2).
a
b