Operation Manual

3:8
A
B
5 4.5 2.5 3-5 3
6 4.5 1.5 3-5 3
Sewing
Blind hem stitch
The blind hem stitch is used to make invisible hems on skirts,
trousers and home decorating.
• Finish the edge of the hem.
• Fold and press the hem allowance inwards.
• Fold the hem back on itself so
approximately 1/4 inch (6 mm) of
the À nished edge extends beyond
the fold. The wrong side of your
project should now be facing up.
• Place the fabric under the presser
foot so that the fold runs along edge guide B.
• When the needle swings into the fold it should catch a small
amount of fabric. If the stitches are visible on the right side,
adjust edge guide B by turning adjusting screw A.
Stitch
Stitch
Stitch 5
Stitch 6
Elastic blind stitch
The elastic blind hem stitch is especially suitable for stretchy
fabrics. The hem is À nished and sewn at the same time. There is
no need to À nish the raw edge À rst.
Create the blind hem as described under ”Blind hem stitch”.