Operation Manual

2:14
Utility stitches and practical sewing
Sewing on buttons
With zigzag stitch G/E (stitch width 4
mm) you can sew on two and four hole
buttons.
• Remove the sewing foot and lower the
feed dog.
• Turn the handwheel towards you and
move the button so that the needle enters
the left hole in the button.
• Now lower the presser foot lifter; this
holds the button in place.
• Sew on the button. Take care to ensure
that the needle also enters the right-hand
hole in the button.
Securing
• Select straight stitch by turning the
width dial (27) to 0.
• Change the needle position with the
needle position dial (28) so that the needle
enters one of the two holes.
• Sew a few securing stitches.
stitch
G
E
E
4
4
4
–
–
–
2-3
2-3
2-3
–
–
–