Operation Manual

Increase the bobbin thread
tension slightly
for cording. Pfaff recommends
you
fill
your
cording so it keeps its shape
in the laundry.
Filler
cord
thickness depends
on cording
size
you want. To sew
filled
cording,
use the two cording plates
with cord ducts.
Only very
narrow
tucks ore
made
without filler cord.
Machine Setting: Dial
A=0
Lever
B=1
Dial C=0
Lever E=0
(Both
needles are
to be threaded
by
hand.)
Additional Information
on
Cording
Ordinary
cording in medium-heavy
fabric
is made with cording foot
No. 41319 and
cording plate No. 41842.
For thicker cording use foot No.
41318 with cording plate
No. 105996.
Cording foot No. 41 641 and cording plate No. 41842 (with
center claw, but
without
cord duct) serve to moke narrow
air tucks in
lightweight
material. Pin tucks
without
filler
cord also are made with cording foot No. 41641,
However, for these,
cording
plate No. 41844 is used. Cording height and width are determined
by the
distance
between the two needles,
the cord diameter and the height of
the ridge on the
cording
plate. Thread tensions
also influence cording size. For uniform
spacing of parallel
tucks, attach on adjustable
guide to the cording foot. When space
between
tucks is
very narrow, place
the preceding seam into one of the grooves
of the foot
and use it
as
a
guide.
This
procedure
insures uniform and parallel
rows of cording.
51
R6945.
[
:;;.
Upper Threading
for Two-Needle Work