Operation Manual

53
Darning
Machine Setting:
A—O . B— 4
Prepare your
machine
for
darning
as
follows:
Remove
presser foot
and drop machine
feed.
Use
feed
cover
plate No. 41 251 to
increase
tautness
of
fabric
in hoops and permit free
movement.
To
fasten the
feed
cover
plate to
the
machine,
slip
its finger
into the
hole of the
needle
plate,
as
illustrated,
turn,
and fasten
in position
with bed
slide (see illustration
below).
R 5914
Attach darning
foot
as instructed
on page
22,
and
suspend
presser bar from
the rear
of the face cover with
darning hook
No. 46128.
Even
though
the
presser
bar is sus
pended, the presser
bar lifter must
be lowered to
activate the
tension,
or
the
upper
thread tension
will be
released——and you
cannot sew without
it.
Place
fabric into darning
hoops.
45
R
5918