Data Sheet

User Manual

WiLoader Revision G
Specs
Pinout
!
2
Supply voltage: "3.3v to 5.5v!
I/O voltage: 1.8v to 5.5v!
Over-voltage protection: up to 20v!
Current consumption:
Peak (packet transmit): 350 ~ 500 mA
Average (station mode): < 50 mA
(exact value: TBD)
Reverse-voltage protection
Over-current protection
Programming protocol:
AVR ISP (via SPI)
Optiboot boot-loader ( Arduino Uno compatible)"!
STK500 boot-loader (Arduino Mega compatible)!
WiFi-UART bridge Baud Rate:
300 to 4,608,000 bps