Data Sheet

User Manual

WiLoader Revision G
The user can use the indicated button in the image below for changing the color of that section
or tab.!
Note: The color of different windows and tabs, as well as the path of the 10 last used files and
also the last used micro-controller will be stored in the configuration file. These informations
will be restored every time the software is launched.!
Note: The clock frequency in the AVR ISP protocol should be selected according to the MCU’s
data sheet. This value can usually be up to a quarter (and sometimes only up to one-sixth) of
the micro-controller’s frequency. For example, if a 16 MHz crystal is being used, this value can
be increased to 4 Mbps. The boot-loader’s frequency should be the same as the value
specified inside the boot-loader’s source code.!
Note: The user can add other MCUs that support AVR ISP protocol to the drop down list.
In order to add a new MCU, the user should open “etc” folder inside WiLoaderFX
directory. Inside etc folder, there is a file with the name “wiloader-mcus.xml”. After
opening the file, new MCUs can be added by following the methods used for the exiting
MCUs. ( In macOS instead of opening WiLoaderFX folder, user should right click on the
app and choose “show package contents”)
24