Data Sheet

User Manual

WiLoader Revision G
WiLoaderFX Programming Tab
This is the main section of WiLoaderFX that is employed by the user, when utilizing GUI
interface.!
The user can select the type of memory he or she wants to perform the operation on (Flash or
EEPROM), as well as the type of operation (Write, Read, Verify). The protocol must also be
selected to perform the selected operation. If the AVR ISP is selected, the ISP protocol will be
used with the SPI port. The Optiboot protocol for the Arduino Uno boards and the stk500v2
protocol for the Arduino Mega boards can be used, when boot-loader is burned on them.!
Furthermore, users who do not use the Arduino boards, but need to use a boot-loader in order
to release MCU’s SPI pins, can download the compatible boot-loader hex files with the two
boot-loader mentioned before and program them on their boards. From now on, they can use
the reset, RXD and TXD pins for programming the MCU with boot-loaders.!
22