Data Sheet

User Manual

WiLoader Revision G
WiLoaderFX Terminal Tab
In order to utilize the WiFi-UART Bridge feature, the user can use the terminal tab or other
network data-transmission softwares (such as “socket test” software).!
The user must first select the desired WiLoader from the drop down list and then click the
connect button on the bottom of the page, in order to send and receive data on WiLoader’s
serial port. If successful, the button will turn red and the text will become “Discon". For sending
data, the following formats can be employed: UTF-8 (for sending data as Unicode), Hex string,
and ASCII string.!
In case of hex and ASCII formats, bytes in the desired string must be separated by space. For
example:!
Hex: 1f 45 8 F4!
Decimal: 234 12 0 4!
Entering negative numbers or values larger than 255 is not permitted.!
19