Manualshelf

Data Sheet

ManualsBrandsPetunia Tech ManualsArduino Compatible PartsWiLoader Wireless AVR & Arduino Programmer
11121314151617181920
User Manual
WiLoader Revision G
WiLoaderFX Software Settings
In order to adjust the software parameters, use the options available in the bottom section of
setting tab.!
These settings are stored in wiloader.conf file in the etc directory and are loaded and applied
every time at the beginning of the software run.!
Broadcast option is enabled by default. In order to find WiLoader on the network, the software
sends packets by the UDP protocol to the local network broadcast address. For example, a
network with “192.168.1.1” gateway and “255.255.255.0” subnet will have a broadcast
address of “192.168.1.255”.!
12