User Manual

32 Customer Care Center 1-800-732-2677
Troubleshooting
Receiver Collar
is not beeping or
correcting.
Make sure the Receiver Collar is turned ON and the
battery status lights are flashing every 4 seconds.
Charge the Receiver Collar and go through the
ReadyTest
®
and PerfectFit
diagnostic tests.
Check that the Fence Transmitter Power is turned ON
and the transmitter status light is solid green. If not, refer
to YardMax
Rechargeable In-Ground Fence Operating
Guide.
The Receiver
Collar is beeping,
but the pet is not
responding to the
Static Correction.
Make sure Static Correction is set at 2 or higher.
Test the Receiver Collar with the Test Light walking over
the Boundary Wire.
If the Test Light flashes, check the fit of the Receiver
Collar using the PerfectFit feature.
Trim your pet’s fur where the Contact Points touch the
neck or use the long Contact Points.
Increase the Static Correction Level.
Repeat training steps to reinforce training.