User Manual

14 Customer Care Center 1-800-732-2677
Prepare the Receiver Collar
Your Receiver Collar comes with
short Contact Points installed.
Use the long Contact Points
for dogs with long or thick hair.
Tighten the Contact Points using
the Contact Point Wrench (2A).
Check the tightness weekly. The
Receiver Collar is waterproof.
To Turn On the
Receiver Collar
Press and hold the Mode Button
for 1 second (2B). The green or
yellow or red Receiver Indicator
Light will turn ON for 5 seconds
(2B) to indicate battery status,
followed by the red Receiver
Indicator Light flashing the Static
Correction Level.
2A
2B
Mode Button
Step
2