User Guide

A
Carrying handle
Power switch
B
3
Turn on and test the dispenser
For best results, perform these steps away from your dog:
A. Press the power switch on the back of the dispenser to turn the unit on (|). The status
light will glow green.
B. If your dog is in the room with you, open the lid and set the Volume switch to O. It is
best to let your dog get used to the sound of the dispenser before adding a tone.
C. Press the dispense button
on the remote to dispense the food. You may need to press
the button a few times to get the treats/kibble to dispense after filling.
D. Once the treats/kibble start dispensing, press the dispense button
several more times
to make sure the food size is compatible with the disc you selected. If the food size is
correct, a treat/kibble should dispense each time you press the dispense button
.
Jamming will occur if the treats/kibble are too large or moist.
DEITESNLFREN