Owner manual

www.petsafe.net 13
DENL ITFR ESEN
Transmitter Range Chart
(Note: These distances are approximate.)
Boundary
Control Dial
Position
Boundary
Switch LOW
Boundary
Switch HIGH
1 5 m 11 m
2 6 m 12 m
3 7 m 15 m
4 8 m 17 m
5 9 m 20 m
6 11 m 25 m
7 13 m 29 m
8 14 m 32 m
Record Your Settings
Final
Boundary
Switch
Setting
(HIGH or
LOW)
Final
Boundary
Control
Dial
Position
(1-8)
Receiver
Static
Stimulation
Level (1-6)
Home
Camping
Holiday
Other
STEP 5
Place the Boundary Flags
The Boundary Flags are visual reminders for your pet of where the Boundary Zone is located. The Receiver Collar
will activate within 0.6 m to 1 m of the Boundary Flags.
1. Using the Test Light, with the Static Stimulation Level set
at 2 or greater, hold the Receiver Collar at your pet’s
neck height with the PetSafe
®
logo facing away from
the Transmitter.
2. Walk towards the Boundary Zone until the Receiver
Collar beeps and the Test Light flashes (5A).
3. Place a Boundary Flag in the ground (5B).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is
marked with Boundary Flags every 3 m.
The Boundary Flags may be in different parts of the Boundary Zone and may not be in a line. The Boundary Zone
is 0.6 m to 1 m wide.
5A 5B