ADD-A-DOG™ SDF-CTR OPERATING GUIDE PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING
Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other affiliate or Brand of Radio Systems Corporation may be referred to collectively as “We” or “Us”. IMPORTANT SAFETY INFORMATION Explanation Of Attention Words And Symbols Used In This Guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Thank you for choosing SportDOG Brand™ products. Used properly, this product will help you contain + train your dog efficiently and safely. To ensure your satisfaction, please review this owner’s manual thoroughly. If you have questions regarding this product’s operation, please contact our Customer Care Center, visit our website at www.sportdog.com, or view our support videos at www.youtube.com/sportdogbrand.
TO TURN THE COLLAR RECEIVER ON/OFF Press and release the power button (located between the Contact Points) for about one second - the unit will power on immediately, as well as beep 1-3 times, depending on the static stimulation range setting (2 is the default setting). To turn the unit off, press and hold the power button for 3 seconds. A long beep will sound, then the unit will turn off. NOTE: If the user does not press any button, the display will go blank after 15 seconds.
OPERATIONAL MODE LIGHT COLOR BATTERY STATUS LIGHT FUNCTION SPEAKER FUNCTION VIBRATION DISPLAY • Unit is delivering training tone Off N/A N/A Unit will beep for as long as button is pressed N/A • • Unit is delivering training vibration Off N/A N/A N/A Unit will N/A vibrate for as long as button is pressed (up to 10 seconds) N/A • Unit is delivering a Green containment warning stimulation N/A Light will slowly flash for 2 seconds Unit will beep slowly for 2 seconds Unit will N/A vibr
CHANGING STATIC STIMULATION RANGES (TRAINING) STEP :: 03 FIND THE BEST INTENSITY LEVEL FOR YOUR DOG (TRAINING) The Contain + Train™ system has multiple intensity levels. This allows you to choose the static stimulation that is best for your dog. NOTE: Always start at the lowest level and work your way up. For training efficiency, it’s important to find the right intensity level for your dog. This is called the Recognition Level, at which your dog looks around in curiosity or flicks his ears.
MODE 1* 2 3 4 5 6 7 V/T (ID CODE) UPPER BUTTON FUNCTION Continuous stimulation (Level set by Intensity Dial) OR Vibe if V/T on dial Continuous stimulation (Level set by Intensity Dial) OR Tone if V/T on dial Dog 1: Continuous stimulation (Level set by Intensity Dial) OR Tone if V/T on dial Dog 1: Continuous stimulation (Level set by Intensity Dial) OR Vibe if V/T on dial Continuous stimulation (Level set by Intensity Dial) OR Tone if V/T on dial Continuous stimulation (Level set by Intensity Dial) O
TO RETURN THE UNIT TO THE FACTORY ID FOLLOW THESE STEPS: 1. 2. 3. Turn the Intensity Dial to V/T, and then press and release the Mode Button on the back of your Remote Transmitter. This doesn’t change the mode, so the current mode will still be active after the ID change is complete. Don’t press any buttons and wait until the green Transmitter Indicator Light turns off. You’ll need to match the Collar Receiver to the Remote Transmitter (see STEP 5 on page 12). TERMS OF USE AND LIMITATION OF LIABILITY 1.
COMPLIANCE FCC: USA TWO YEAR NON-TRANSFERRABLE LIMITED WARRANTY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
18 1-800-732-0144 WWW.SPORTDOG.
SPORTDOG.
