Owner's Manual

3
Rinse the carbon filter with cold water, set it
into the filter housing and close.
Insert the filter housing into the opening on
top of the pump.
Set the tower down over the filter housing
and press down on the silicone gasket to
form a seal. Connect the power adaptor.
Place the fountain where your pet will use it. Fill the bowl with water, leaving a half inch of space between the water and the rim. Make sure
your hands, the cord and the power adaptor are dry, then plug the fountain into an outlet.
If your pet is hesitant to use the fountain at first, try leaving the fountain unplugged until your pet is comfortable drinking from it.
Install the carbon filter and the tower:
Keep health and happiness flowing!
Use instructions