Owner's Manual

petsafe.com 9
13
13. Attach the tower by aligning it with the raised
notches on the back of the bowl.
14
14. Insert the flow control knob into the hole on
the top of the tower. Turn the knob clockwise
to maximize the water stream. Turn the knob
counter clockwise to decrease the water stream
or shut it off.
15
15. Attach the lid to the tower. Pick up the pet
fountain by the bowl and place it in a desired
location. Pour water into the bowl, leaving 1/2
inch of space between the water level and the
rim of the bowl.
16
16. Make sure the electrical power cord, the
adaptor and your hands are completely dry.
Connect the in-line plug and make sure no
silver is showing, then plug the adaptor into a
standard electrical wall outlet.
NOTE: Never let the water level fall below 1 inch
from the base of the bowl, or your pump might fail.