Owner's Manual

www.petsafe.net

Pet Fountain Cleaning

Note:

Replace the carbon ﬁlter every two to four weeks and replace the foam ﬁlter every one to

two months.

1. Unplug the fountain, and disconnect the in-line plug.

2. Pick up the pet fountain by the bowl, and take it to the sink.

3. Lift up the tower, flip it over and remove the rubber grommet.

4. Remove the filter housing from the pump by

pulling up.

5. Open the filter housing, and remove and discard the carbon filter.

6. Hold the pump down, and pour the rest of the water out.

7. Remove the rubber cap from the raised post.

8. Remove the pump, and then pull the cord through the raised post.

9. Remove the foam filter from the pump and discard.

10. Reference page 6 for instructions on cleaning your pump. You can use the motor brush from the

Drinkwell

Cleaning Kit to clean inside the pump. Use a solution of 80% water and 20% white

vinegar to remove hard water buildup.

11. Wash all other parts with warm water and soap, or place in the top rack of the dishwasher.

Note:

Do not place the adapter, rubber cap, rubber grommet or pump in the dishwasher.

12. Reference page 6 for assembly instructions.

Replacement Parts and Accessories

Replacement parts or accessories for your fountain can be purchased by visiting www.petsafe.net

or by contacting our Customer Care Center at 1-800-732-2677.

Filter subscriptions now available! Get fountain ﬁlters automatically and

conveniently delivered right to your door when you need them. Free shipping and

5% discount included. Visit www.petsafe.net to sign up or call our Customer Care

Center at 1-866-738-4379.

Part Description Replacement Part Number

Drinkwell Carbon Replacement Filters, 4-Pack PAC00-13906

Drinkwell Foam Replacement Filters, 2-Pack PAC00-13711

Drinkwell Replacement Pump PAC00-13206

Drinkwell Replacement Filter Housing PAC00-13908

Drinkwell Fountain Cleaning Kit CKPH