Owner's Manual

Customer Care Center 1-800-732-2677
8
11. Rinse the filter, insert it into the housing and close.
12. Insert the filter housing into the pump.
13. Lower the tower into the bowl. It should seal to the
filter housing.
14. Pick up the pet fountain by the bowl and place it
in a desired location. Pour water into the bowl and
leave a ½ inch of space between the water level
and the rim of the bowl.
15. Make sure the electrical power cord, the adapter
and your hands are completely dry. Connect the
in-line plug and make sure no silver is showing,
then plug the adapter into a standard electrical
wall outlet.
Note:
Never let the water level fall below 1 inch
from the base of the bowl or your pump
might fail.
11
12
13
15